Barcode Handy Terminal BHT-805BWB User’s Manual
ix BHT-805BWB Handling the CU • If smoke, abnormal odors or noises come from the CU, immediately unplug the AC adapter from the wall socket or CU an
84 BHT-805BWB “2: IP ADDRESS”: Setting the IP address Select “2: IP ADDRESS” at the SET TCP/IP menu to display the screen on the right where the curr
85 Barcode Handy Terminal Setting the FTP 1. Select “2: SET FTP” at the SET TCP/IP menu and then press the ENT key. The SET FTP menu screen on th
86 BHT-805BWB “2: OPTION”: Setting the FTP options Select “2: OPTION” at the SET FTP menu to display the screen on the right where the current settin
87 Barcode Handy Terminal Setting the DHCP 1. Select “3: DHCP” at the SET TCP/IP menu and then press the ENT key. The SET DHCP screen on the righ
88 BHT-805BWB [8] Setting the resume function Use the following procedure to set the resume function. 1. Select “1: RESUME” from the SET SYSTEM Me
89 Barcode Handy Terminal [10] Setting the RPC The BHT-800 series is compliant with the BHT Manager software (host-side tool). The RPC screen displa
90 BHT-805BWB [11] Setting the operation log The BHT-800 series is compliant with the BHT Manager software (host-side tool). The OPERATION LOG sets
91 Barcode Handy Terminal 4.5.7 BHT Operation Test (TEST Menu) Use the following procedure to perform a BHT operation test. 1. Select “5: TEST” at
92 BHT-805BWB [1] Barcode scanning test Use the following procedure to perform a barcode scanning test. 1. Select “1: BARCODE” at the TEST menu an
93 Barcode Handy Terminal Setting the Barcode Scanning Test Options When performing the barcode scanning test, press the F1 key to display the scre
x Barcode Handy Terminal To System Designers: • When introducing BHTs in those systems that could affect human lives (e.g., medicines management sy
94 BHT-805BWB [2] Memory test Use the following procedure to perform a memory test. 1. Select “2: MEMORY” at the TEST menu and then press the ENT k
95 Barcode Handy Terminal [3] Scale test Use the following procedure to perform a scale test. 1. Select “3: BEEPER” at the TEST menu and then press
96 BHT-805BWB [5] LCD and indicator LED tests Use the following procedure to perform an LCD and indicator LED test. 1. Select “5: LCD” at the TEST
97 Barcode Handy Terminal 4. Press the ENT key. The entire screen turns a lighter shade of gray. Press the BS/C key to return to the previous scree
98 BHT-805BWB 7. Press the ENT key. The entire screen turns red, and at the same time, the indicator LED turns red. Press the BS/C key to return to
99 Barcode Handy Terminal 10. Press the ENT key. A 1-dot thick frame displays around the screen. Press the BS/C key to return to the previous screen
100 BHT-805BWB [6] File test The file test allows detailed information on program files, data files, audio files (*.WAV), and image files(*.JPG) to
101 Barcode Handy Terminal ◆ Media files (*.WAV) 1. Use the cursor keys ([▲] [▼]) to select a *.WAV file, and then press the ENT key. The screen t
102 BHT-805BWB ◆ Media files (*.JPG) 1. Use the cursor keys ([▲] [▼]) to select a *.JPG file, and then press the ENT key. The screen to the right
103 Barcode Handy Terminal ◆ Font files (*.FN3/FN4) 1. Use the cursor keys ([▲] [▼]) to select a *.FNT file, and then press the ENT key. Press the
xi BHT-805BWB • If the BHT has been stored in a hot (50°C to 60°C, 122°F to 140°F) and humid place, allow it to sit at room temperature and humidity
104 BHT-805BWB ◆ Other files (*.DAT, *.TXT, etc.) 1. Use the cursor keys ([▲] [▼]) to select a file, and then press the ENT key. If field informat
105 Barcode Handy Terminal [7] Communication test Use the following procedure to perform a communication test. 1. Select “7: COMMUNICATION” at the
106 BHT-805BWB 3. At the slave BHT to be tested, select “1: SLAVE”, and at the master BHT, select “2: MASTER”. Then press the ENT key. The screen on
107 Barcode Handy Terminal [8] Key-entry, speaker and vibrator test Use the following procedure to perform a key entry, speaker and vibrator test. 1
108 BHT-805BWB [9] PING test Use the following procedure to perform a PING test. 1. Select “9: PING” at the TEST menu and then press the ENT key. T
109 Barcode Handy Terminal Upon completion of the PING test, the screen on the right displays. The PING result may include the following: OK: Disp
110 BHT-805BWB “2: SET PING” (PING Options Setting Screen) 1. Select “2: SET PING” at the TEST PING menu and then press the ENT key. The current
111 Barcode Handy Terminal PING Echo Request Transmission Timing (SEND TYPE) Two types of echo request send timings are available: TYPE 1 and TYPE 2.
112 BHT-805BWB “3: SET DEVICE” (PING Device Setting Screen) 1. Select “3: SET DEVICE” at the TEST PING menu and then press the ENT key. The TCP
113 Barcode Handy Terminal 4.5.8 System Information (SYSTEM INFORMATION Menu) [1] Displaying the BHT system information Use the following procedure
xii Barcode Handy Terminal Handling the CU • Never disassemble or modify the CU; doing so could result in an accident such as fire or malfunction.
114 BHT-805BWB [1] Functions for which licenses have been registered (∗) 1. Use the cursor keys ([▲] [▼]) to highlight the name of a function that
115 Barcode Handy Terminal [2] CU-811 System Information Display Use the following procedure to display CU-811 system information. 1. Place the BHT
116 BHT-805BWB 4.5.9 Downloading/Uploading Files by FTP (FTP MENU) Use the following procedure to download and upload files by FTP. 1. Select “7: FT
117 Barcode Handy Terminal 2. Use the cursor keys ([▲] [▼]) to highlight the item to be set, and then press the ENT key. The mode changes to entry
118 BHT-805BWB [2] Uploading by FTP 1. Select “2: UPLOAD” at the FTP MENU and then press the ENT key. The screen on the right displays if uploadab
119 Barcode Handy Terminal 3. Enter the directory and file name, or select a file, and then press the ENT key. Press the BS/C key to return to the
120 BHT-805BWB FTP Download/Upload Messages When the BHT is uploading or downloading files by FTP, the following messages will appear at the bottom o
121 Barcode Handy Terminal Response Messages from the FTP server The messages that FTP servers send during and after FTP operations vary, but servers
122 BHT-805BWB 4.5.10 Wireless Communcation Settings (DEVICE MENU) Use the following procedure to set up wireless communication and bluetooth wireles
123 Barcode Handy Terminal Wireless Network Settings Menu 1. Select “1: RF NETWORK” in the SET RF PARAMETER menu and then press the ENT key. T
xiii BHT-805BWB Declaration of Conformity For European Union English: Hereby, DENSO WAVE INCORPORATED, declares that this BHT-805BWB contains Wireles
124 BHT-805BWB Wireless Network Parameter Settings 1. Select “1: NETWORK PARAMETER” in the SET RF NETWORK menu and then press the ENT key. The
125 Barcode Handy Terminal Wireless Security Settings 1. Select “2: SECURITY” in the SET RF PARAMETER menu and then press the ENT key. The screen
126 BHT-805BWB Wireless Security None Mode WEP can be used with the Wireless security None mode. To enable WEP, WEP and WEP KEY settings are req
127 Barcode Handy Terminal 4. Use the cursor keys ([▲] [▼]) or numerical keys ([2] [3] [4] [5]) to highlight a WEP KEY from 1 to 4, and then press
128 BHT-805BWB 8. Press the BS/C key to return to the SECURITY CONFIG menu. - Point - It is not possible to read a written WEP key, and therefore
129 Barcode Handy Terminal Wireless Security 1x Supplicant Mode EAP authentication can be used with wireless security 1x Supplicant mode. 1. Sele
130 BHT-805BWB 5. Use the numerical keys to enter an ID and press the ENT key. Press the SF and the BS/C key to change the entry mode (numerical en
131 Barcode Handy Terminal Wireless Security WPA-1x Mode EAP authentication and an encryption system can be used with wireless security WPA-1x mod
132 BHT-805BWB 5. Use the numerical keys to enter an ID and press the ENT key. Press the SF and the BS/C key to change the entry mode (numerical en
133 Barcode Handy Terminal 13. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: WPA CIPHER] and then press the ENT key. The scr
xiv Barcode Handy Terminal Polski: Niniejszym, DENSO WAVE INCORPORATED, oświadcza, że ten BHT-805BWB zawiera moduł łączności bezprzewodowej dla sie
134 BHT-805BWB 3. Ensure that [1: PRE SHARED KEY] is highlighted and then press the ENT key. The mode changes to entry mode and the cursor displays
135 Barcode Handy Terminal 2. Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: AUTH PARAM (EAP)] and then press the ENT key. T
136 BHT-805BWB 8. Use the cursor keys ([▲] [▼]) or numerical key ([4]) to highlight [4: PASSWORD] and then press the ENT key. The mode changes to e
137 Barcode Handy Terminal Wireless Security WPA2-PSK Mode PSK authentication and an encryption system can be used with wireless security WPA2-PSK
138 BHT-805BWB 8. Press the ENT key or BS/C key to return to the SECURITY CONFIG menu. Wireless Parameter Initialization 1. Select “3: INITIA
139 Barcode Handy Terminal [1]-2 Site Survey Menu 1. Select “2: SITE SURVEY” at the RF MENU and then press the ENT key. The SITE SURVEY screen on
140 BHT-805BWB [2] BLUETOOTH MENU (RF MENU) 1. Select “2: BLUETOOTH” in the DEVICE MENU and then press the ENT key. The BLUETOOTH MENU screen on th
141 Barcode Handy Terminal Setting up the Bluetooth® parameter 1. Select “2: SET BLUETOOTH” in the BLUETOOTH MENU and then press the ENT key.
142 BHT-805BWB Setting up the device detection parameters 1. Select “2: INQUIRY” in the SET BLUETOOTH menu and then press the ENT key. The curren
143 Barcode Handy Terminal Setting up the master station 1. Select “3: MASTER” in the SET BLUETOOTH menu and then press the ENT key. The current
xv BHT-805BWB
144 BHT-805BWB Setting up the serial port profile (SPP) service for the connection target 1. Press numeric key [7] and the SF key simultaneously in
145 Barcode Handy Terminal Setting up the slave station 1. Select “4: SLAVE” in the SET BLUETOOTH menu and then press the ENT key. The current s
146 BHT-805BWB Setting up the file transfer protocol options 1. Select “5: SPP PARAMETER” in the SET BLUETOOTH menu and then press the ENT key.
147 Barcode Handy Terminal [3] Detecting remote devices 1. Select “3: BROWSE DEVICE” in the BLUETOOTH MENU and then press the ENT key. The screen o
148 BHT-805BWB 5. Use the cursor keys ([▲] [▼]) or numeric key ([3]) to highlight the [3: NUM RESPONSES] and then press the ENT key. Entry mode is
149 Barcode Handy Terminal The confirmation screen on the right is displayed. To set the selected address as a remote device address, select “1: Ye
150 BHT-805BWB Searching for services 1. Select “2: BROWSE SERVICE” in the BROWSE DEVICE menu and then press the ENT key. The screen on the righ
151 Barcode Handy Terminal When the service inquiry is completed or the service inquiry time has elapsed, the Bluetooth® device address of the desti
152 BHT-805BWB Displaying the authenticated remote device addresses 1. Select “3: AUTH BD_ADDR” in the BROWSE DEVICE menu and then press the ENT
153 Barcode Handy Terminal File transfer with serial port profile 1. Select “4: SERIAL PORT” in the BLUETOOTH MENU and then press the ENT key. T
1.1 System Configuration ···················································································2 1.1.1 Hardware Co
154 BHT-805BWB 7. Use the cursor keys ([▲] [▼]) or numeric key ([1]) to highlight the [1: DO IT] and then press the ENT key. A serial port connecti
155 Barcode Handy Terminal 4.5.11 Wireless Communcation Settings (DEVICE MENU) Delete program files or data files stored in the FLASH ROM. Use the fo
156 BHT-805BWB 4.5.12 Deleting Font Files (DELETE FILE Menu) Delete font files stored in the FLASH ROM. If there is insufficient user area, by deleti
157 Barcode Handy Terminal To delete font files: Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: Yes] and then press the ENT ke
158 BHT-805BWB 4.5.13 Downloading/Uploading the BHT System Parameter File (SYSTEM PARAMETER Menu) The system parameter file (file name: ”_BHT.SYS”) i
159 Barcode Handy Terminal [1] Downloading the BHT system parameter file 1. Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: D
160 BHT-805BWB [2] Uploading the BHT system parameter file 1. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: UPLOAD] and t
161 Barcode Handy Terminal 4.5.14 Setting the Remote Wake-up (SET REMOTE WAKEUP Menu) Use the following procedure to perform remote wake-up settings.
162 BHT-805BWB 4.5.15 Downloading/Uploading the System Message File (SYSTEM MESSAGE Menu) The system message file is a file (file name: “_B80MSG.FN3”
163 Barcode Handy Terminal [1] Downloading the system message file 1. Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: DOWNLOA
2 BHT-805BWB 1.1 System Configuration This section describes the hardware required for the barcode data collection system used by the BHT and the BH
164 BHT-805BWB [2] Uploading the system message file 1. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: UPLOAD] and then pres
165 Barcode Handy Terminal 4.5.16 Updating the System (MODIFY MENU) Use the following procedure to update the system. 1. Press the dot key while hol
166 BHT-805BWB When the Displayed File Name Differs from the BHT System Update File If the name of the file displayed at [2: FILENAME] differs fro
167 Barcode Handy Terminal [2] Updating the CU-811 system Update the CU-811 system after downloading the CU-811 system update file. (Refer to sectio
168 BHT-805BWB If the System Update File Does not Exist when Updating the CU-811 System The screen on the right displays if the CU-811 system upda
BHT-805BWB 5.1 Infrared Communication ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 170 5.1.1 Infrared Communication Port Transmissi
170 BHT-805BWB 5.1 Infrared Communication The BHT has a built-in infrared communication device that enables wireless transfer of programs and data b
171 Barcode Handy Terminal 5.1.1 Infrared Communication Port Transmission Speed Communicating Device Transmission Speed BHT-800 Series Max. 460.8
172 BHT-805BWB 5.2 Wireless Communication The BHT-805BW is equipped with a 2.4 GHz frequency band wireless module. 5.2.1 Usage Precautions • It may
173 Barcode Handy Terminal 5.2.2 Setting Parameters Programs written in BHT-BASIC control wireless communication with commands between the BHT and ac
3 Barcode Handy Terminal Host Computer Allows you to edit, manage and download user programs and data, as well as downloading system programs. Mode
174 BHT-805BWB EAP TYPE This is the EAP authentication method setting used for 802.1x authentication. Select PEAP or EAP-TLS. This is valid only wh
175 Barcode Handy Terminal 5.3 Bluetooth® Wireless Communication 5.3.1 Usage Precautions • It may be possible to avoid the easy occurrence of comm
176 BHT-805BWB 5.3.2 Setting Parameters Bluetooth® Device Address Remote devices return these addresses, uniquely assigned to each Bluetooth® devi
177 Barcode Handy Terminal 5.4 Basic Communication Specifications and Parameters 5.4.1 Basic Communication Specifications The table below lists the
178 BHT-805BWB Transmission Code and Bit Order • All characters should be coded to 7 or 8-bit code for data transmission. • The standard code at
179 Barcode Handy Terminal 5.4.2 Communications Parameters In System Mode and user programs written in BHT-BASIC, you can set the communications para
180 BHT-805BWB
BHT-805BWB 6.1 Replacing the Battery Cartridge ······························································182 6.1.1 Battery C
182 BHT-805BWB 6.1 Replacing the Battery Cartridge 6.1.1 Battery Cartridge Service Life The battery cartridge is a consumable part and should be repl
183 Barcode Handy Terminal 4. Insert the battery cartridge cover tab (1), and then close the battery cartridge cover (2) to lock the cover in positio
i BHT-805BWB Preface Thank you for using the BHT-805BWB DENSO WAVE Barcode Handy Terminal. Please read this manual thoroughly prior to operation to
4 BHT-805BWB 1.1.2 Software Configuration This section describes the software used for BHT Series application development and application in addition
184 BHT-805BWB 6.2 Using the BHT after Long Periods Data stored in the BHT may be lost and the calendar clock may stop if the BHT is left unused fo
185 Barcode Handy Terminal 6.3 Daily Maintenance 6.3.1 Proper Care of the BHT Wipe any dirt from the BHT housing, charge terminals, and BHT or batte
186 BHT-805BWB
BHT-805BWB 7.1 System Errors ·························································································188 7.2
188 BHT-805BWB 7.1 System Errors The error messages that display on the screen and the causes and countermeasures to be taken if an error occurs whe
189 Barcode Handy Terminal Message BHT Response Cause Countermeasure The date and time settings screen displays, awaiting entry. The c
190 BHT-805BWB Message BHT Response Cause Countermeasure If this error occurs, the warning tone beeps five times. During execution of
191 Barcode Handy Terminal Message BHT Response Cause Countermeasure After displaying this error message, the BHT may start a user pro
192 BHT-805BWB 7.2 System Mode Errors When error messages display while running System Mode, refer to the following table and take appropriate measu
193 Barcode Handy Terminal Message BHT Response Countermeasure The current download will exceed the maximum allowable number of files
5 Barcode Handy Terminal [3] Software Used at the BHT Unit The BHT unit FLASH memory has a system area and user area, with the system program sto
194 BHT-805BWB Message BHT Response Countermeasure The memory is insufficient for setting up the BHT system parameter file or system
BHT-805BWB 8.1 BHT-805BWB Specifications ··································································196 8.1.1 Hardware Sp
196 BHT-805BWB 8.1 BHT-805BWB Specifications 8.1.1 Hardware Specifications Power supply (main power): Rechargeable lithium-ion battery cartridge (3
197 Barcode 8.1.2 Barcode Specifications Supported Barcode Types Barcode Type Bar Dimensions Scan Magnification Universal product codes EAN-13 (JAN
198 BHT-805BWB 8.1.3 Scanning Performance Scanning Reference Position As illustrated at left, align the reading window with the center of the label
199 Barcode *1 Under the following conditions: - Ambient illuminance: 500 Lx. (Xenon arc lamp) - Code 39, 4 digits Narrow bar: Wide bar = 1
200 BHT-805BWB 8.1.4 Interface Specifications IrDA Interface Specification: IrDA Ver1.3 Low Power physical layer compliant (Except transmission
BHT-805BWB 9.1 CU-800 Specifications·············································································202 9.1.1 Hardw
202 BHT-805BWB 9.1 CU-800 Specifications 9.1.1 Hardware Specifications CU-801 CU-811 CU-821 Power supply: 100/230 V AC (Using dedicated AC adapte
203 Barcode Handy Terminal 9.1.3 Interface Specifications CU-801 The CU-801 RS-232C interface connector uses Dsub-9P. Pin. No. Signal Name Funct
6 BHT-805BWB • System Mode This program is used to operate files, make system environment settings, and perform various types of tests. Refer to “Cha
204 BHT-805BWB CU-811 The CU-811 has an IEEE802.3-compliant Ethernet interface port (100Base-TX). Ethernet Interface Port (RJ45 jack) on the CU-81
205 Barcode Handy Terminal 9.2 When File Transfer is Not Possible Using the Transfer Utility This section describes the causes and remedies when file
206 BHT-805BWB Error No. Cause Details Remedy The Transfer Utility “Communication port” option specification is illegal. Specify the communication
207 Barcode Handy Terminal Error No. Cause Details Remedy An attempt was made to download a BHT-BASIC 3.6 format program file (*.PD3).Use BHT-BASIC
Barcode Handy Terminal BHT-805BWB User’s Manual First Edition July 2011 DENSO WAVE INCORPORATED
7 Barcode Handy Terminal 1.2 Components and Functions 1.2.1 BHT Front/Rear No. Name Function and Description (1) LCD
8 BHT-805BWB 1.2.2 Keypad The BHT key functions can be set at user programs. The diagram below shows an example of settings for each key function.
9 Barcode Handy Terminal No. Key Name Function and Description (6) Numerical keys Used to enter data. (7) Enter key Press to finalize entered d
10 BHT-805BWB 1.2.3 BHT Screen If the system display is set to ON at the system settings or in the user program, icons display at the bottom of the s
BHT-805BWB 2.1 “BHT Preparation” Procedure ·····································································12 2.2 Loading
12 BHT-805BWB 2.1 “BHT Preparation” Procedure Follow the steps below to prepare the BHT for use. 2.2 Loading and Charging the Battery Cartridge
13 Barcode Handy Terminal Charging with the communication unit (CU-801, CU-811 and CU-821) or battery charger (CH-851 and CH-854) 1. Slide the bat
ii Barcode Handy Terminal Customer Registration and Inquiries Customer Registration To allow us to provide our customers with comprehensive service a
14 BHT-805BWB 4. Connect the dedicated AC adapter to the DC input connector on the charger and plug the adapter into the wall socket. The charger Pow
15 Barcode Handy Terminal Charging with the battery charger (CH-201A and CH-704) 1. Check the battery cartridge terminals and insert the cartridge
16 BHT-805BWB 5. Check the battery cartridge terminals and indication on the BHT unit, and then insert the cartridge in the direction indicated by t
17 Barcode Handy Terminal Mishandling of the charger may result in charger overheating, smoke generation, blowout orcombustion. Please read the foll
18 BHT-805BWB 2.2.1 Battery Power Level Indicator Confirming at the Power Level Icon The battery power level can be confirmed at the battery icon (
19 Barcode Handy Terminal2.3 Attaching the Hand Strap Attach the hand strap to prevent the BHT from being accidentally dropped during use. 2.3.1 A
20 BHT-805BWB 2.4 Initial Setup Turn ON the power after inserting the fully charged battery cartridge into the BHT. The clock will not have been set
21 Barcode Handy Terminal2.5 Turning OFF the Power Use one of the following three methods to turn OFF the BHT power. Normal power OFF → Press the
22 BHT-805BWB 2.5.4 If the BHT Is Shut Down Abnormally If the BHT is shut down abnormally* and is left without a battery cartridge or with a dischar
23 Barcode Handy TerminalIf Scandisk finds a broken file(s), the right screen will appear. (As long as a broken file exits, the screen displays eve
iii BHT-805BWB About this Manual • Due to improvements and so on, the content of this manual may be subject to change without prior notice. • The
24 BHT-805BWB About “$$BRKLST.SYS” If Scandisk finds a broken file(s), it will automatically create the "$$BRKLST.SYS" file. To check the
BHT-805BWB 3.1 Scanning Barcodes···················································································26 3.2 Num
26 BHT-805BWB 3.1 Scanning Barcodes Follow the procedure below to scan barcodes. 1. Turn the BHT power ON. 2. Press the trigger switch. The
27 Barcode Handy Terminal When unable to successfully read barcodes… Cause Countermeasure Specular reflection When the illumination LED is focused
28 BHT-805BWB 3.2 Numeric Data Entry Enter numeric data such as product volume with the numeric keys and Enter ( ) key. If numeric data is
29 Barcode Handy Terminal 3.4 Changing the Default Settings The volume, vibrator, LCD display brightness and power save settings can be changed at t
30 BHT-805BWB 2. Use the [▲] and [▼] cursor keys to select the item to be changed. The selected item is highlighted. 3. Use the [◄] and [►]
31 Barcode Handy Terminal 3.5 Transmitting Data Data gathered by the BHT can be transmitted to the host computer by infrared communication, wireless
32 BHT-805BWB 3.5.1 Infrared Communication When performing data communication between BHT units Point the BHT infrared communication ports toward e
33 Barcode Handy Terminal 3.5.2 Wireless Communication Transmit data to host computer via the wireless LAN access point. To perform wireless communic
iv Barcode Handy Terminal Viewing this Manual − About the Bookmark The PDF Bookmark function can be used to jump to the Contents page. <Procedure
34 BHT-805BWB
4.1 Initializing the BHT System ·······································································36 4.1.1 Selecting the M
36 BHT-805BWB 4.1 Initializing the BHT System By initializing the system, program files and data files downloaded to the BHT user area are deleted,
37 Barcode Handy Terminal 4.1.1 Selecting the Memory Area to be Initialized 1. Press the Power key ( ) while holding down the SF, M1 and 0 keys t
38 BHT-805BWB 4.1.2 Selecting the Message Version (English or Japanese) 1. When the screen on the right displays, select the message display languag
39 Barcode Handy Terminal 4.1.4 Performing System Initialization 1. The screen on the right displays during system initialization.
40 BHT-805BWB 4.2 Updating the System 4.2.1 Updating the BHT System The BHT system update procedure is as follows. BHT System Update File Download
41 Barcode Handy Terminal 4.2.2 CU-811 System Update The CU-811 system update procedure is as follows. CU-811 System Update File Download ↓ CU-81
42 BHT-805BWB 4.3 Executing User Programs User programs (application programs) can be executed using the following methods. Select the most appropri
43 Barcode Handy Terminal Several directory management program examples are given below. The names of the files used in these examples are as follows
v BHT-805BWB − Searching by Word The PDF search function can be used to jump to the target page by entering words or characters related to the item b
44 BHT-805BWB (Example 3) Recommended download method After system initialization, first download the program to be executed simply by pressing the
45 Barcode Handy Terminal 4.4 System Mode By starting up the BHT in System Mode and selecting each menu, the following operations can be performed i
46 BHT-805BWB 4.4.2 System Mode Basic Operation Menu Selection and Display Use the following procedure to select and display each menu. 1. Press the
47 Barcode Handy Terminal Setting Value Selection Use the following procedure to select setting values. 1. Press the numerical key corresponding to
48 BHT-805BWB 4.4.3 SYSTEM MENU Configuration Menu Configuration for Items Displayed at the SYSTEM MENU Screen Select the item with the numerical key
49 Barcode Handy Terminal Uploading Refer to section “4.5.4 Uploading Files”. System Environment Se
50 BHT-805BWB DEVICE MENU Refer to section “4.5.10 Wireless Communication Settings”.8 and ENT keys BS/C key
51 Barcode Handy Terminal Menu Configuration for Items Not Displayed at the SYSTEM MENU Screen Press the corresponding numerical key while holding do
52 BHT-805BWB 4 with SF held down 6 with SF held down Dot [.] with SF held down BS/C key Setting Remot
53 Barcode Handy Terminal 4.5 SYSTEM MENU 4.5.1 Executing Setup (SETUP Menu) The BHT setup can be effectively executed using the BHT Setting and clo
vi Barcode Handy Terminal Related Documentation • BHT-BASIC Programmer’s Manual (BHT-800 Series) This is an instruction manual used to create handy
54 BHT-805BWB 2. Execute the master-side setup. Setup is performed with the BHT Setting and other SYSTEM MENU functions. 3. Perform the settings fo
55 Barcode Handy Terminal 6. Align the BHTs as shown below, and then press ENT on the transmitting device. The data transmission progress sta
56 BHT-805BWB When communication is complete, the screen will return to the CLONE MENU (the previous screen.) In the event of a communication error,
57 Barcode Handy Terminal 4.5.2 Executing User Programs (EXECUTE PROGRAM Menu) Individually select and execute user programs downloaded to the BHT.
58 BHT-805BWB 4.5.3 Downloading Files (DOWNLOAD Menu) Download files to the BHT user area from other devices such as the host computer. - Point - •
59 Barcode Handy Terminal 2. Select either “1: FILE” or ”2: HT<-->HT COPY” and press the ENT key. The screen on the right displays indicating
60 BHT-805BWB 5. When downloading is complete, the speaker sounds once and the screen on the right displays. When the number of received records equ
61 Barcode Handy Terminal 4.5.4 Uploading Files (UPLOAD Menu) Upload files stored in the BHT user area to another device. Use the following procedure
62 BHT-805BWB 2. Select “1: FILE”, ”2: ALL FILES” or ”3: HT<-->HT COPY” and press the ENT key. When “1: FILE” is selected: The screen on the r
63 Barcode Handy Terminal 4. By executing the BHT-BASIC 4.0 Transfer Utility or similar program, the screen on the right displays and file uploading
vii BHT-805BWB SAFETY PRECAUTIONS Be sure to observe all these safety precautions. Please READ through this manual carefully. It will enable you to
64 BHT-805BWB 4.5.5 Copying Files between 2 BHT Units Copy “all files (excluding font files)”, “setting data”, and the “date and time” stored in the
65 Barcode Handy Terminal - Note - The following setting data is copied when copying between BHT units. LCD contrast level Volume Switching betwee
66 BHT-805BWB FTP option, Line delimiters (CR/LF) FTP option, Handling of line delimiters FTP option, Handling of trailing spaces in data fields FTP
67 Barcode Handy Terminal 4.5.6 System Environment Settings (SET SYSTEM Menu) Use the following procedure to set the system environment. 1. Select “
68 BHT-805BWB [1] Setting the auto-start execution program Use the following procedure to set the auto-start execution program. 1. Select “1: EXECU
69 Barcode Handy Terminal [2] Setting the message version, system status indication and screen display compatible mode Use the following procedure t
70 BHT-805BWB 3. Simultaneously press the SF key and “1: MESSAGE” at the SET DISPLAY menu. The SET DISPLAY menu on the right displays. The highlight
71 Barcode Handy Terminal BHT-805BWB BHT-300 Mode BHT-7500 Mode BHT-100 Mode Normal Mode Standard font 22 x 16 char. (10 x 20 dots) 26 x 26 char.
72 BHT-805BWB System Status Indication Turning ON the system status indication displays the following icons at the bottom of the screen. Indicati
73 Barcode Handy Terminal [4] Setting the special barcode scanning parameters Use the following procedure to set the barcode scanning conditions. 1.
viii Barcode Handy Terminal Handling the battery cartridge • Never disassemble or heat the battery cartridge, nor put it into fire or water; doing s
74 BHT-805BWB “3: ITF”: Minimum number of digits to be read for ITF “4: STF”: Minimum number of digits to be read for STF “5: CODABAR”: Minimum
75 Barcode Handy Terminal Use the following procedure if necessary to change the communication environment settings. 1. Select “5: COMMUNICATION” at
76 BHT-805BWB “2: PROTOCOL”: Communication protocol options setting screen Select “2: PROTOCOL” to display the screen shown on the right The highl
77 Barcode Handy Terminal “2: PROTOCAL TYPE”: Setting the communication protocol type 1. Select “2: PROTOCOL TYPE” at the SET COMMUNICATION menu
78 BHT-805BWB Select “1: Ymodem” at the PROTOCOL TYPE menu to display the screen on the right. The highlighted settings will be the current settings.
79 Barcode Handy Terminal Select “3: BHT-Ir Protocol” at the PROTOCOL TYPE menu to display the screen on the right. Enter the ID number of the BHT u
80 BHT-805BWB [6] Defining the functions of the Shift key and Magic keys Use the following procedure to change the key settings. 1. Select “6: KEY”
81 Barcode Handy Terminal “2: M1 KEY” - ”5: M4 KEY”: Defining the Mx key functions 1. Select “2: M1 KEY” to “5: M4 KEY” at the SET KEY menu and t
82 BHT-805BWB Defining the backspace/clear key (BS/C key) function The BS/C key deletes the last entered character (backspace), and when pressed
83 Barcode Handy Terminal [7] Setting the TCP/IP, FTP and DHCP Use the following procedure to change the TCP/IP, FTP and DHCP settings. 1. Select “
Comments to this Manuals