Denso BHT-825QW User Manual download pdf (Page 204)

189

2D Code Handy Terminal

4.5.15 Downloading/Uploading the System Message File

(SYSTEM MESSAGE Me

nu)

The system message file is a file (file name: “_B80MSG.FN3”) used by the system to display messages

such as “Shutdown in progress. Do not remove the battery.” or “Charge the battery!”.

Downloading/Uploading the System Message File

(1) Upload the system message file to the host computer and so on.

(2) Download the uploaded system message file at another BHT.

♦ Uploading the System Message File

Create a system message file based on the current system message settings and upload it to the host

computer and so on. After uploading, delete the created system message file.

♦ Downloading the system message file

Receive the system message file from the host computer and so on to which it was backed up, and after

setting the stored system messages, delete the received system message file.

The communication parameters, communication protocol, and interface set at “[5] Setting the

communication environment” in section “4.5.6 [5] System Environment Settings” are used when uploading

and downloading.

- Supplement

System messages are normally set when the BHT is shipped from the factory, and

therefore operation at this menu is unnecessary.

Use the following procedure to download and upload the system message file.

1. Press the 6 key while holding down the SF key at the SYSTEM MENU.

The SYSTEM MESSAGE menu displays as shown on the right.

[1: DOWNLOAD]:

Downloads the system message file.

[2: UPLOAD]:

Uploads the system message file.

Refer to the following section for details of the above items.

Press the BS/C key to return to the SYSTEM MENU.

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 252 253

No comments

Denso BHT-825QW User Manual Page 204