26
BHT-825Q series
3.1 Reading Barcodes or 2D Codes
Follow the procedure below to scan barcodes.
1. Turn the BHT power ON.
2. Press the trigger switch.
The BHT emits a guide marker (laser light) and the light
for reading.
3. Hold the BHT close to the code to align the guide
marker.
When the BHT has read the code successfully, the
indicator LED will illuminate in blue.
− Note − z If required, clean dirty labels before reading.
z It may not be possible to perform reading in direct sunlight.
z If the code is on a curved surface, flatten the label surface and read it again.
z If the code reading window is pulled away from the code, the readable code range will become
narrower than that of the light emission.
− Point − The trigger switch is assigned to magic
keys M3 and M4 when shipped from the
factory.
− Point − The code reading method may differ
depending on the application. Select the
most appropriate in accordance with the
instructions provided in the application
User’s Manual.
Power key
Guide marker
Comments to this Manuals