Denso AT27Q-SB User Manual download pdf (Page 96)

Codabar (NW-7)

Items Parameters Defaults Refer to:

Enable, without a check digit 

Enable, with a check digit

(Check digit transmission enabled)

Enable, with a check digit

(Check digit transmission disabled)

Reading Codabar (NW-7)

Disable

Section 12.2

Minimum number of readable digits

for Codabar (NW-7)

4 digits

Maximum number of readable digits

for Codabar (NW-7)

3 to 99 digits

(including start/stop codes)

99 digits

(See Note 1.)

Transmit a/b/c/d



Transmit A/B/C/D

Transmission of Start/Stop codes

for Codabar (NW-7)

Disable

Section 12.2

MOD-16



Check digit method for Codabar (NW-7)

7-check method

Section 12.2

(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.

Code 39

Item Parameters Defaults Refer to:

Enable, without a check digit 

Enable, with a check digit

(Check digit transmission enabled)

Enable, with a check digit

(Check digit transmission disabled)

Reading Code 39

Disable

Section 12.2

Minimum number of readable digits

for Code 39

1 digit

Maximum number of readable digits

for Code 39

1 to 99 digits

(excluding start/stop codes)

99 digits

(See Note 1.)

Enable

Transmission of Start/Stop codes

for Code 39

Disable 

Section 12.2

Enable

Conversion to FULL ASCII

Disable 

Section 12.2

(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.

: Can be changed only with the configuration software.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 127 128

Comments to this Manuals

No comments

Denso AT27Q-SB User Manual Page 96

Comments to this Manuals

Related products and manuals for Bar code readers Denso AT27Q-SB