Denso BHT-300B Specifications download pdf (Page 161)

Chapter 5 Handling the CU-300 (Option)

147

[ 2 ] CU-311

This section describes how to start communication with the host PC in System Mode (FTP).

(1) Turn the host PC on.

(2) Make sure that the AC adapter is plugged into a wall socket and the POWER LED is lit.

(3) Turn the BHT off and then put it on the CU-311.

CU-311

Ethernet interface

C adapter

(4) Turn the BHT on and start System Mode. Set up the TCP/IP (device) or FTP (FTP server IP address,

user ID, etc.). Refer to Chapter 2, Section 2.5.3, [4.9].

(5) On the host PC, initiate an FTP server program.

(6) To exchange data by FTP between the BHT and the host PC, select "FTP" on the SYSTEM MENU.

Refer to Chapter 2, Section 2.5.3, [ 7 ].

The BHT and the host PC start communication with each other via the CU-311. Upon start of

communication, the DATA LED comes on; after completion of communication, it goes off.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 177 178

No comments

Denso BHT-300B Specifications Page 161