Denso AT10Q-SM User Manual download pdf (Page 47)

7.2.4 ADF script mode

The ADF script refers to a simple program language designed for editing of data read. It enables the following

functions.

(1) Extracting data that is fixed or variable in length

(2) Supporting Application Identifiers (AIs) in EAN-128 (GS1-128), RSS (GS1 DataBar) and EAN.UCC Composite

symbols

(3) Sorting data blocks into the specified order

(4) Collating data for verification

(5) Outputting same data repeatedly

(6) Performing four arithmetic operations including residue calculation, e.g., transformation of units

(7) Substituting data

(8) Comparing character strings

(9) Driving indicator LED and beeper

The ADF script mode can be programmed with the configuration software (ScannerSetting_2D). To configure the

scanner with the ADF script, transfer the script to the scanner or generate an ADF script QR code symbol with the

configuration software (ScannerSetting_2D) and use the scanner to read the symbol.

For the specifications and instructions for use of the ADF script, refer to the ADF Script User's Guide.

Note: The ADF script mode cannot be used together with any of other edit modes (data extraction mode, data

substitution mode, and data blocksorting mode).

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 112 113

No comments

Denso AT10Q-SM User Manual Page 47