Denso AT10Q-SM User Manual download pdf (Page 7)

iii

To System Designers:

• When introducing the scanner in those systems that could affect human lives (e.g., medicines

management system), develop applications carefully through redundancy and safety design

which avoids the feasibility of affecting human lives even if a data error occurs.

• The scanner uses a laser light for indicating

the scanning range. The intensity of laser

light might be too low to inflict bodily injury.

However, do not look into the laser beam.

The scanner complies with IEC

60825-1:1993+A2:2001.

In accordance with Clause 5, IEC 60825-1,

the following information is provided to the

user:

LASER RADIATION

DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

Caution – Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous laser light exposure.

• Never bring any metals into contact with the terminals in connectors.

Doing so could produce a large current through the scanner, resulting in heat or fire, as well as

damage to the scanner.

• Keep the AC adapter away from water.

Failure to do so could cause fire or electrical shock.

• Never use the scanner on the line voltage other than the specified level.

Doing so could cause the scanner to break or burn.

• Do not use the scanner where any inflammable gases may be emitted.

Doing so could cause fire.

• Do not scratch, modify, bend, twist, pull, or heat the power cable of the AC adapter. Do not place

heavy material on the cable or allow the cable to get pressed under heavy material.

Doing so could break the cable, resulting in a fire.

• Do not subject the scanning window of the scanner to direct sunlight for extended periods.

Doing so could damage the scanner, resulting in a fire.

• If smoke, abnormal odors or noises come from the scanner, immediately switch off the host

computer, disconnect the AC adapter and the interface cable, and contact your nearest dealer.

Failure to do so could cause fire or electrical shock.

• If foreign material or water gets into the scanner, immediately unplug the AC adapter and the

interface cable, and contact your nearest dealer.

Failure to do so could cause fire or electrical shock.

• If you drop the scanner so as to affect the operation or damage its housing, switch off the host

computer, unplug the AC adapter and the interface cable, and contact your nearest dealer.

Failure to do so could cause fire or electrical shock.

1 2 3 4 5 6 7 8 9 10 11 12 ... 112 113

No comments

Denso AT10Q-SM User Manual Page 7