Denso RC5 Specifications download pdf (Page 576)

100

101

21-24

21.5 Draw

VISSCREEN (Statement)

Function

Designates a drawing screen.

Format

VISSCREEN <Draw object>, <Screen number>[, <Draw mode>]

Explanation

<Draw object> Designates the storage memory or overlay memory

(screen) (0 or 1).

0: Storage memory (Processing screen)

1: Overlay memory (Draw only screen)

<Screen number> Screen number on each screen

Storage memory (Processing screen): 4 screens from 0

to 3

Overlay memory (Draw only screen): 2 screens, 0 and

<Draw mode> Designates the display drawing method(0 or 1).

0: Instant display OFF

1: Instant display ON

If ignored, 1 is the default setting.

Note (1): When you turn ON the power, VISSCREEN 1, 0, 1 are set as

the initial setting.

Note (2): When the system executes the draw instruction with instant

display ON, the draw result is displayed on the monitor.

However, with instant display OFF, the screen is renewed

after the execution of instructions corresponding to the draw

object of either VISPLNOUT or VISOVERLAY.

Note (3): With instant draw ON, when the draw instruction is executed,

it takes about 0.02 seconds for the system to renew.

Therefore, if you frequently repeat drawing, requirement time

rapidly accumulates. By setting the instant draw to OFF and

displaying all objects once, it is possible to save processing

time.

Note (4): For this instruction, a µ

µµ

µVision board (option) is required.

Related Terms

VISBRIGHT, VISCLS, VISPUTP, VISLINE, VISPTP, VISRECT, VISCIRCLE,

VISELLIPSE, VISSECT, VISCROSS, VISLOC, VISDEFCHAR, VISPRINT

1 2 ... 571 572 573 574 575 576 577 578 579 580 581 ... 691 692

Comments to this Manuals

No comments

Denso RC5 Specifications Page 576

Comments to this Manuals

Related products and manuals for Robotics Denso RC5