Denso RC5 Specifications download pdf (Page 643)

100

101

Chapter 21 Vision Control (Option)

21-91

Note (1): Designate the process range with the window.

Note (2): If the position of the designated window is not on the screen,

an execution error will result.

Note (3): The shape of the window available to designate is a rectangle

with 0 degrees. If you designate any shape other than this, an

error occurs.

Note (4): The processing object is the screen designated with

VISWORKPLN.

Note (5): When this command is executed, the process screen 3

(VISWORKPLN 3) is used as a work area and data on the

process screen 3 are not guaranteed. Also, you cannot use

the process screen 3 for processing.

Note (6): The following data can be obtained with the processing result

obtaining function.

Note (7): For this instruction, a µ

µµ

µVision board (option) is required.

Note (8): If the search range of a designated window is wide and the

radius is small, the processing time increases and a timeout

error may occur.

Related Terms

WINDMAKE, VISWORKPLN, VISGETNUM, VISSTATUS, SHDEFCIRCLE

VISSTATUS (n)

n Item

0 Execution Result 0 = Normal -1 = Abnormal

1 Number

2 Execution Time

VISGETNUMa, b

b a = 0~511

0 Number

1 X Coordinate Value

2 Y Coordinate Value

3 unknown

4 Level

5 unknown

6 unknown

7 unknown

8 unknown

9 unknown

1 2 ... 638 639 640 641 642 643 644 645 646 647 648 ... 691 692

Comments to this Manuals

No comments

Denso RC5 Specifications Page 643

Comments to this Manuals

Related products and manuals for Robotics Denso RC5