Denso RC5 Specifications download pdf (Page 107)

9.4.5 Network Error Indication on DeviceNet Master

The network error display parameter is set to "0: Every Time" by default. It means

that a network error will display every time if it occurs at execution of each I/O

command.

The default is for safe operation of the facilities and is ideal for practical operation.

However, during checking of program operations with dummy I/Os for adjusting

facilities, you need to set this parameter to "1: First Time." Doing so will not display

errors once detected, allowing you to check program operations.

NOTE: After completion of adjustment, be sure to set this parameter back to "0."

Changing the FieldNetwork ErrDisplay parameter

Access: [F4: I/O]—[F6 Aux.]—[F1 Set H/W]

Step 1

In the Auxiliary Function (I/O) window, press [F1 Set H/W].

Step 2

Select "10: FieldNetwork ErrDisplay" and press [F5 Change].

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 137 138

No comments

Denso RC5 Specifications Page 107