116
Step 11
Set the assembled extension board strut back into place and tighten the screws.
Tightening torque: 0.69 Nm ±20%
Step 12
djust the position of each board support plate with the screw so that each
extension board will be supported firmly.
When installing more than one extension board, be sure to tighten screws starting
on the lower board.
Tightening torque: 0.15 Nm ±20% for the lower slot
0.10 Nm ±20% for the middle slot
0.15 Nm ±20% for the higher slot
Required only
for the robot
controller
(RC5-VM6A)
designed for
the VM-6070D.
Required only
for the robot
controller
(RC5-VM6A)
designed for
the VM-6070D.
Comments to this Manuals